Industries Served · Chemical
Chemical Plant Scales & Calibration.
Tank, vessel, and hazardous area scales serviced in your plant. Pressure, temperature, pH, electrical, and torque instruments calibrated in our accredited labs. 4-hour on-site scale response from 28 locations. Employee owned since 1995.
Accreditation:
ISO/IEC 17025
Response Time:
4-Hours
Calibration Labs:
3 Accredited
Locations:
27
★★★★★
Over 1,600 Five-Star Reviews Across Our Offices
Over 1,600 Five-Star Reviews Across Our Offices
Out of Tolerance Ruins Batches Quietly
A chemical plant runs on charge weights, pressures, and temperatures. When a scale or a gauge fails outright, everyone knows. When it drifts, nobody notices until a batch fails QC or a customer rejects a lot. A vessel scale reading 0.5% heavy short-charges a 20,000 lb batch by 100 lb. A temperature probe reading 2 degrees low runs every batch 2 degrees hot. Every batch, until someone checks. System Scale services the scales on your floor with a 4-hour on-site response and calibrates the instruments around them in our accredited calibration labs.What We Cover
Every Scale and Instrument in Your Plant
Scales get serviced where they sit. Instruments ship to our calibration labs. Everything on this list is work we do today. Need something that isn’t listed? Ask. If it’s outside what we do, we’ll tell you before we quote it.
On the Plant Floor
Tanks, Vessels & Reactors
Weigh modules and load cells under tanks, reactors, and hoppers for inventory and charge weights. Installed to account for connected piping, agitator vibration, and thermal growth.
Hazardous Area Weighing
Intrinsically safe scales, terminals, and weigh modules for classified areas. Intrinsically safe or explosion-proof, we match the equipment to your area classification.
Batching, Formulation & Filling
Formulation scales, terminals, and controls that run a recipe or fill drums and totes to target weight, with the actual weight on the record.
Receiving & Shipping
Truck and rail scales for inbound raw materials and outbound product, certified legal for trade.
In Our Calibration Labs
Pressure
Pressure gauges and pressure instruments from process lines, utilities, and test stands, calibrated in our labs.
Temperature
Thermocouples, RTDs, thermometers, and temperature indicators. Thermodynamic calibration for the probes that control your reactions.
pH & Conductivity
pH meters and conductivity meters from the QC lab and the process floor. See chemical calibration, and our pH meter care guide for the daily checks.
Electrical & Test Equipment
Electrical calibration for multimeters, process meters, and the test equipment your maintenance team relies on.
Torque, Dimensional & Mass
Torque tools, calipers and micrometers, and test weights, plus lab balances calibrated where they sit.
Accredited Where It Counts
Scale calibration is ISO/IEC 17025 accredited at all 28 System Scale locations. Our three dedicated labs carry a broader accredited scope. Check our scope for any instrument before an audit.
How We Work
4-Hour On-Site Response
When a batch scale goes down, the batch waits and so does everything behind it. Our technicians are on site within 4 hours, find the root cause instead of swapping parts until it works, and test the scale before they leave. If a repair takes longer, a rental scale keeps product moving.
Mail-In Calibration From Three Labs
Instruments ship to our dedicated calibration labs in Little Rock, AR; Evansville, IN; and Columbus, GA. Each one comes back with as-found and as-left data and a certificate in CalVault, so you know whether it was in tolerance before you used it. See our lab services.
One Partner for Every Plant
Most chemical companies run more than one plant, and each one tends to end up with its own scale vendor, its own calibration lab, and its own records. We work from 27 locations, so one partner can cover your scales and plant instruments on one preventative maintenance schedule with one set of records.
Chemical Program
| Scales | Tank, vessel, floor, truck, rail, and lab scales |
| Instruments | Pressure, temperature, pH, conductivity, electrical, torque, and dimensional |
| Hazardous Area | Intrinsically safe scales and terminals |
| Service | 4-hour on-site scale response, preventative maintenance, mail-in lab calibration |
| Records | CalVault customer portal |
| Accreditation | View our scope |
| In Business | Since 1979 |
Tell us how many scales and instruments you run and how many plants. We’ll tell you what we’d fix first.
Certified Before the Next Batch Runs
Every scale service call and every lab calibration ends with the equipment tested, with as-found and as-left readings on the record so you can see what changed and by how much. Certificates and due dates live in CalVault, so a customer audit, an ISO surveillance visit, or a batch investigation pulls from one place instead of five inboxes. Check our master scope before an audit or a customer file request.
A Company Built to Last · Not to Flip
The People Calibrating Your Plant Have
Equity in Getting It Right.
System Scale has been employee owned since 1995. That’s not a trivia fact. It defines how we do business. We aren’t a PE roll-up and we aren’t building to sell. The technician servicing your scales and the lab tech calibrating your instruments are owners, not rotating contractors.
Continuity. You get the same technicians on your site, not a rotating dispatch queue. They learn your plant, your batch schedule, and your site safety rules.
Retention. Employee ownership creates stability. Our technicians stay longer, learn your sites, and become more effective over time.
Independence. We are not building to sell. You do not have to worry about an acquisition changing your pricing, service model, or relationships overnight.
Questions
Chemical Plant Scale & Calibration FAQ
How often should process scales and instruments be calibrated?
There is no single right interval. It depends on your quality system, your process tolerance, and how much the scale or instrument moves between calibrations. We set the interval from as-found data, then shorten or extend it based on what we find each visit.
Can you work on scales in hazardous areas?
Yes. We sell, install, and service intrinsically safe scales, terminals, and weigh modules for classified areas, and our technicians work within your site permit and safety requirements. Tell us the area classification up front and we will match the equipment to it.
What is the difference between intrinsically safe and explosion-proof scales?
Both are ways to use electrical equipment safely in a classified area. Intrinsically safe equipment limits electrical energy so it cannot ignite the atmosphere. Explosion-proof equipment uses an enclosure built to contain an ignition inside it. Which one fits depends on your area classification, the equipment, and how it is installed. We will match the equipment to your classification before we quote it.
Why does our tank scale drift?
The usual causes are rigid piping that carries load around the load cells, thermal expansion, vibration from agitators and pumps, moisture in junction boxes, and corroded or overloaded load cells. Most repeat drift traces back to one of these. We fix the root cause, not just the reading.
Is System Scale ISO/IEC 17025 accredited?
Yes. All 28 System Scale locations are ISO/IEC 17025 accredited for scale calibration, and our dedicated calibration labs carry a broader scope of accreditation for other instrument types. Not every job needs an accredited certificate, and we also provide NIST-traceable calibration. Our full scope and certificate are posted on our scope of accreditation page.
Do we need an ISO/IEC 17025 accredited calibration certificate?
Not always. Some quality systems and customers require accredited certificates. Others accept NIST-traceable calibration. Check what your quality manual and customer contracts call for. We will tell you which certificate you are getting before we do the work, and our scope of accreditation shows what is accredited.
How fast can you get a technician to a down scale?
We commit to a 4-hour on-site response. Our technicians work from 28 locations, so most plants in our footprint have an office close by.
Can you calibrate pressure, temperature, and pH instruments?
Yes. Our dedicated labs in Little Rock, AR; Evansville, IN; and Columbus, GA calibrate pressure gauges, temperature instruments, pH and conductivity meters, electrical test equipment, torque tools, and dimensional gauges, with mail-in service nationwide. Between calibrations, our pH meter care guide covers the daily checks. If an instrument is outside our scope, we will tell you before we quote it.
Where do our calibration records live?
In CalVault, our customer portal. Certificates and due dates for every scale and instrument at every plant, in one place, ready when an auditor asks.
Tank & Vessel Weighing
Hazardous Area
Hazardous Area
Intrinsically safe scales, terminals, and weigh modules for classified areas.
Service & Maintenance
Temperature Calibration
pH & Conductivity
pH & Conductivity
pH and conductivity meter calibration for the QC lab and process floor.
Lab Calibration
Talk to an owner
Talk to an owner about the scales and instruments in your plants. Tell us how many sites you run, what’s in the process, and what’s been drifting or breaking. Every technician who picks up the phone has equity in keeping your batches on spec. We’ll tell you exactly what we can do, and what we can’t.